System info

The system information page provides an overview of the project's memory usage as well as the firmware version.

Used Sys Memory	This is the memory occupied by the system. This memory space is managed automatically and cannot be modified. This allocation represents approximately 4 MB of memory.
Used Wave Memory	This memory is used for loading samples and wavetables. This allocation represents approximately 12 MB of memory. If memory usage approaches 100%, you may no longer be able to load additional samples or wavetables. (A warning message will be displayed when loading in this case.)
Firmware version	Indicates the firmware version currently installed on the Antigone.

How to access system information?

From the "PROJECT" page (main screen), tap the burger menu located at the top left, then scroll down to "SYSTEM INFO" and select this option.

The page may take several seconds to load while calculating memory usage.

System configuration (persistent)

Separately from project data, Antigone keeps a small system-wide configuration on the SD card at /System/config.json. It is loaded at startup and is independent of the project that is open. It currently holds:

• the Clock and Instrument Control configuration locks (see Instrument control and Clock);
• the Set List setup;
• the screensaver timeout.

These settings survive project loads and are restored every time the module powers up.